The images below show step by step how the shower can be installed on the Gardentub.
At all times the faucet must be installed first and then the shower.
Drill the hole for the shower at the indicated point on one of the two short sides.
Turn the Teflon tape at the end of the shower grommet and insert the shower grommet through the drilled hole.
For further installation, of the shower the Gardentub must be placed on its side.
Guide the shower grommet through the opening under the Gardentub and slide it into the mounting plate. Then thighten the mounting plate with the screws (no drilling required).
Connect the garden hose under the Gardentub to the garden hose coupling.
Place the Gardentub upright again.
Tighten the Teflon tape on the end of the shower grommet, which can be seen on the edge of the Gardentub.
Screw the shower rod onto the end of the shower grommet that can be seen on the edge of the Gardentub.
A: The height of the shower can be adjusted by turning.
B: The shower head can be rotated into different positions
C: Secure the shower to the end of the shower grommet by tightening the screw.